Ammeter A-DM-7002
TK-AT-0001
Digital Meter with display levels upt 16000
ampres
1000 ampere/50mv shunt
This meter has an accuracy of =/- 1%
120VAC grounded line cord
Packaged in a rugged metal carrying case
A-DM-7002
Digital Meter with display levels upt 16000
ampres
This meter has an accuracy of =/- 1%
120VAC grounded line cord
Packaged in a rugged Hard Plastic case
Shot Timer
A-TM-0001 Timer/Counter, 4 Digit
The A-TM-0001 digital timer is available as a stand alone time or for installation
on new or old magnetic particle equipment. It provides the most up to date
accuracy of 1% with infinite hold, auto reset, and update functions that will
meet or exceed all industrial and military requirements.
Test-Meter-Kits
Test Meter Kits
These Unique instruments are used to measure the output levels of
the magnetizing current, and/or the shot duration of the magnetizing
current of magnetic particle inspection machines. Included in the
Digital Acquisition Timer and Ammeter Test Kits are the following.

* Digital meter with display levels up to 16,000 amperes.
* Digital Timer that reads up to 100 seconds.
* 1000 ampere 50 mv shunt.
* 120 volt grounded line cord.
* Packaged in a rugged metal carrying case.
The digital timer used has an accuracy of .o1 seconds =/- 1 digit.
Both meters continue to display output current level as well as the
time duration. These readings are held until the next shot. At that
time both units automatically reset and take a new rading.
MPI Ammeters
Copyright 2016 by Solid State Systems   All Rights reserved    E-Mail: contact@sssndt.com
Solid State Systems
Building 103, 9421 Feron Boulavard
Rancho Cucamonga, California 91730
Tel: 1-909-891-0660
Email: contact@sssndt.com